Header1200x385

× Welcome to the CPL Meteorology question and answer forum. Please feel free to post your questions but more importantly also suggest answers for your forum colleagues. Bob himself or one of the other tutors will get to your question as soon as we can.

Different of AMSL and Pressure Height

  • Posts: 1
  • Thank you received: 0

Ngailingkei created the topic: Different of AMSL and Pressure Height

It is an example shown at page 4 CPL Meteorology:

It is given that the aircraft is 8500 AMSL and the QNH is 1018. Since 8500 is already AT MEAN SEA LEVEL, isn’t it already its Pressure Height, instead of 8350?
#1
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 2474
  • Thank you received: 266

bobtait replied the topic: Different of AMSL and Pressure Height

#2
Attachments:

Please Log in or Create an account to join the conversation.

  • John.Heddles
  • Offline
  • ATPL/consulting aero engineer
  • Posts: 891
  • Thank you received: 115

John.Heddles replied the topic: Different of AMSL and Pressure Height

Bob has shown the distinction clearly with the sketch. That is, you need to consider the pressure datum level from which the altimeter reading is taken.

However, keep in mind that the 30 ft/hPa is an approximation used for convenience and is fit for purpose at reasonably low altitudes, say, below 8000-10000 feet. Suggest a look at post #6 in this thread to see how the real numbers vary in the ISA model -
www.bobtait.com.au/forum/performance/6777-altimetry-rates#13277

Engineering specialist in aircraft performance and weight control.
#3

Please Log in or Create an account to join the conversation.

Time to create page: 0.242 seconds