Header1200x385

× Welcome to the CPL Navigation question and answer forum. Please feel free to post your questions but more importantly also suggest answers for your forum colleagues. Bob himself or one of the other tutors will get to your question as soon as we can.

1 in 60 question

  • tty3131
  • Topic Author

tty3131 created the topic: 1 in 60 question

I have no problem with 1 in 60 type question but this one which is from exam 1 Q6

Q6
Refer VFR (Day) Booklet Bourke WAC page 30.

I was hoping to get some help on some exam questions that have me stumped

You plan to fly from NARRABRI (YNBR) (3019S 14950E) direct to ST GEORGE (YSGE) (2803S 14836E).

To avoid clouds after departing YNBR you divert left of planned TR along the YNBR - WALGETT railway line. At WEE WAA township (approximately 20 nm WNW YNBR) you decide to track direct to YSGE. The ARFOR wind for your cruise level is 100/20 kt, and your TAS is 140 kt.

The HDG (M) to steer to YSGE is closest to -
Choose one answer.
338 degrees
331 degrees
145 degrees
340 degrees
My answer is 331 but the correct answer is 338.
Thanks everyone in advance!!
#1

Please Log in or Create an account to join the conversation.

  • Stuart Tait

Stuart Tait replied the topic: 1 in 60 question

G'day

The original flight planned track is of no interest here. You followed the railway line to Wee Waa township so that's where we begin. Draw a track from Wee Waa township to St George. Measure that track. It is 340°T. The variation is 10°E [ignore the .5].

So the track from Wee Waa to St George = 330°M.
The wind is 100°T [GPWT winds are True]
So the wind to use for the heading calculation = 090°M at 20 knots.
True air speed is given = 140 knots

Use you computer to calculate a heading = 338°M



Cheers
#2
Attachments:

Please Log in or Create an account to join the conversation.

  • tty3131
  • Topic Author

tty3131 replied the topic: 1 in 60 question

Thank you for your help Stuart Tait ~~~

The picture I attached shows my way to find the answer.

I can't find anything wrong with my method.

I think the main problem is that the TE which is 44 degree is not applied to 1 in 60 thumb of rule as normally the TE should be less than

30 degree.
#3
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.194 seconds